The Pironman 5 case for the Raspberry Pi makes the single-board computer look like a tiny gaming PC, complete with a clear acrylic case, RGB lighting, and more.

Pico Indicator highlights: Compatible with any board following the 2x 20-pin headers layout of the Raspberry Pi Pico 29x LED indicators GPIO – 26x amber LEDs for GP0 to GP28 (excluding GP23, GP24, ...

There's a host of Raspberry Pi-based smart lighting projects you can find online, but if you want to implement a simpler system, check out this light control project by Hudson on YouTube.

Another fun add-on for the Raspberry Pi Pico is the E-Paper Display Module by Waveshare. We've explored the benefits that E-Ink displays bring in our review of the 2022 Amazon Kindle, where we ...

The Raspberry Pi 5 features a 64-bit quad-core Arm Cortex-A76 processor that runs at 2.4GHz (512KB per-core L2 caches, and a 2MB shared L3 cache).

Second, it has a 4-pin I2C connector instead of a 3-pin debug connector. And third, the BPI-Pico-RP2040 has an RGB LED light. Otherwise, the two boards are nearly identical.

For an LED or Light-Emitting Diode, increasing the overall voltage makes it shine brighter, while decreasing it makes it dimmer. But since the Raspberry Pi has no analog output, we’re using PWM to ...

GPIO pins on the Raspberry Pi 3 Model B+. Pin 1 starts from the top-left pin. Each GPIO pin is made to have one of two modes at any given time: a HIGH and a LOW. For the Raspberry Pi’s pinout ...

The key parts required at this time are: U1: Raspberry Pi Pico x1 LED1: 5mm/10mm RGB LED (Common-Cathode) x1 R1: 100Ω ¼ W Resistor R2: 47Ω ¼ W Resistor R3: 47Ω ¼ W Resistor S1: Slide Switch (SPDT) x1 ...

Here, we have two LEDs, the positive terminal of red LED is connected with GPIO 27 (pin 13) and positive terminal of yellow LED is connected with GPIO 22 (pin 15) and negative terminal of both LEDs ...

A right-angled receptacle is used for the connector on the Raspberry Pi 400 side of the buffer board (K1) so it can be inserted in the GPIO header in the back of the enclosure (Figure 3). The ...