As the address 255.255.255.255 is not recognized, you can only send broadcast to a specific subnet. For example, for subnet 192.168.0.0/24 the broadcast is 192.168.0.255. If you send a …

It is crucial to understand that for the network and broadcast addresses all host bits must be set to either 0 or 1, respectively. An IP address can strikingly resemble a network address, when in …

Ping broadcast address - 192.168.1.255 need not be a broadcast address at all. However, it will yield unpredictable results, so it doesn't really solve any problems or provide any consistent …

Find the broadcast address For any octets fully to the right of the interesting column, put 255s in the broadcast address. The left part should be filled already in Find subnet number, the …

4)Block start address 224 and end address is 225 (remember it's third octet not 4th ok) to find out network address off all host bits so your network address is 158.177.224.0 (only fist 3 bit of 3rd …

This template can help you practice questions related to: - Identifying the subnet that a particular host belongs to, given its IP address and network mask. - Identifying the aforementioned …

The broadcast address can be found by subtracting 1 from the subnet address (except for the .0 network, which would result in -1, which is invalid). Again they will be spaced with the "magic" …

ARP = Find MAC address based on known IP address------------ layer 2 broadcast with destination MAC FF.FF.FF.FF.FF.FF within local network, if any one has IP then it will reply to ARP …

And yes, in this case, just to get picture on this, address range for 0 subnet would be:10.9.0.1 to 10.9.7.254, you cant use subnet as host address and of course, the broadcast which is 255.

Have you ever looked at a wireless router at home and connected multiple devices to it? Provided that your bandwidth can handle it, you can connect 256 devices (in theory). The subnet mask …